How to Grow Hydro

How to grow hydro is really about how to maintain your nutrient reservoir. After all, there is nothing you can do to MAKE your plants grow. You can only provide all the best conditions, sit back, and let plant growth happen.

Assume your plants are getting enough light and air and are kept at a good temperature. Plant growth will happen (often quickly) as long as you provide the best conditions in the nutrient solution (and in the rest of the grow room) everyday!


Beginning Water Quality

Learning how to grow hydro starts with your beginning water quality. Check your tap water with a TDS meter. Anything over 200 ppm and you should probably use a reverse osmosis filter, or else use bottled spring water. While not necessary, it’s not a bad idea to treat your water using hydrogen peroxide.

If you really want to complicate things, you can get a complete water test. In this case, you can use tap water with up to 300 ppm as long as no more than 150 ppm of the total is from calcium, calcium carbonate, and sodium compounds.

How to Grow Hydro with Additives and Supplements
Through the water, the plants will receive all of their food. This water needs to contain primary nutrients (N-P-K), secondary nutrients (calcium, magnesium, iron, sulfur), and all trace nutrients. I strongly recommend using a professional hydroponic nutrient product for this.

How to Grow Hydro with Supplements
In addition to regular food, there are a few additives that make a huge difference in the healthy development of your plants. These are vitamins (like Thrive Alive B1), trace nutrient supplements (like Maxicrop liquid seaweed), and plant hormones (in any type of seaweed). Another useful additive is silica, which is used to boost the immune system of plants.

Many expert gardening articles I have read by people who know how to grow hydro recommend adding Thrive Alive B1 and Maxicrop to every drop of water you give your plants. Use 10 ml (2 tsp) per gallon of each. If you are using a seaweed based fertilizer, it is not necessary to add additional liquid seaweed.

For more information on feeding and maintaining your nutrient solution, check out my hydroponic nutrients page.

Nutrient Solution pH

If you want to learn how to grow hydro well, you must know about the pH (potential Hydrogen) scale. Hydroponic nutrients are only in usable forms to your plants when the pH is right. The maximum amount of nutrients are available to your plants in a range of 5.5 pH to 6.5 pH. In hydroponics, the nutrients are often kept around 5.5 because the plants absorb nutrients slightly more quickly at this pH.

Nutrient Availability Help for How to Grow Hydro
Also, the natural tendency is for the pH to creep up slowly over time, so it is your natural tendency to adjust the pH down to the low end of the acceptable range whenever you make a pH adjustment.

Nutrient Solution Strength
People that know how to grow hydro use a total dissolved salts (TDS) meter or an electrical conductivity (EC) meter to tell how strong or how weak the nutrient solution is. The ideal strength of your nutrient solution depends on what type of plants you are growing, and also what stage of the plant life cycle they are in. Check this section out to find out what strength to keep your nutrient solution.

Maintaining your Nutrient Solution
In a ten gallon reservoir, you will need to check the strength (TDS or EC) and the pH of your solution twice a day. With a larger reservoir, the changes in the nutrient solution take more time. I would still recommend you check your nutrient solution at least once a day, no matter what size reservoir you have! People that know how to grow hydro usually use a larger reservoir. 3/4 gallon to one gallon of nutrient solution per plant is a good general guideline to follow.

If you test your nutrient solution and the pH is up, than slowly add pH down. When checking your nutrient solution, it is a good idea to check the pH first (as opposed to checking the TDS or EC first), because the addition of pH down will increase the strength of your nutrient solution a little. If your pH is too high, you may need to add a little pH down.

Once the pH of your nutrient solution has been tested and adjusted, it is time to test the TDS/EC. If the nutrient strength is a little weak, add a little fertilizer. If the nutrient strength is a little high, add plain water. It is a good idea to let any water that you use sit out overnight in an uncovered container. This lets the water de-chlorinate, and also lets the water come to room temperature. Adding cold water will shock the roots, causing root damage as well as above ground damage.

Change it Every Two Weeks
After two weeks of using the same nutrient solution, it is time for a nutrient change. The plants may have been using some nutrients more than others, and now you might be heading for a nutrient imbalance. Keep an extra nutrient reservoir full of plain water waiting for your next nutrient solution change. This ensures you will have de-chlorinated, room temperature water that will not damage your plants’ roots.

It is a good idea to run a tank full of plain water (or 1/4 strength nutrient solution) through the hydroponic system for a few hours in between nutrient changes. This helps to flush out any nutrient buildup. Some experienced gardeners do this every four weeks, or every other nutrient change. The addition of enzymes, such as Hygrozyme, will help with the flushing process. During every nutrient change, consider using hydrogen peroxide to keep things clean and healthy.

The Final Tweak
Once you have a simple feeding plan that is working well, you can try to maximize your results. The best advice here is to make small changes, one at a time, and to let each change show its effects before making another change. Sometimes this will mean waiting two weeks, other times it may mean waiting a whole crop cycle for the results.

My experience has shown that a simple plan with high quality results is what your goal should be. Many times, experimenting only leads to bad results. To make matters worse, if you changed two or more things, you have no idea what is causing the problem now. Anyone interested should learn about these fertilizer and soil additives.

The Final Flush
Pros that know how to grow hydro usually do a final flush just before harvest. This can be done by replacing the nutrient solution with plain water for the last 7 to 10 days. It will help if you change the water each day with fresh, plain water for these last few days. An alternative is to use a product specifically made to help flush out these nutrients, such as Final Flush or Flora-Kleen.

Flushing the crop helps remove any fertilizers in the plant tissue. Flushing will improve the flavor and aroma of the produce coming out of your garden.

—–
Originally published at Jason’s Indoor Organic Guide

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>